Editor’s note: This is a guest post from Mark “Mantic59” Herro.
The neck can be a particularly troublesome area to shave. Some just can’t seem to get a close enough shave. Others are troubled by razor burn with redness and pain, nicks, cuts, and ingrown hairs. Here are 10 strategies that can help tame the neck:
1. Detailed Grain Mapping
The “grain” of the beard–the direction(s) the hairs grow in–can be completely counter-intuitive when it comes to the neck. They can even sometimes grow in a circular pattern. Understanding how the hair grows on your neck is the first step in overcoming shaving problems there. To accomplish this, create a map of your beard with a mapping aid like this one. Using a mirror and gentle circular motions of the fingers, determine the direction(s) your beard is growing in and sketch that onto the face map. Writing arrows in the direction of growth in each box will help you understand how to best shave those areas.
Shaving with the grain initially is one of the basic concepts in shaving, particularly important if you are using a multi-blade cartridge razor. It’s a bit less important with a double-edged razor (you can “cheat” a little and follow the predominant direction without worrying about every twist and turn), but still necessary to keep in mind. Reducing the beard in stages is the key take-away here.
2. Careful Preparation
Properly preparing the skin of the neck is often overlooked: copious amounts of hot water or gently cleaning the skin on the face doesn’t get to the neck. Pay attention and be sure that warm towel or “barbershop prep” lather covers the neck! Some shavers troubled by ingrown hairs on the neck should try a good, thorough scrubbing of the area before putting razor to skin.
3. Pre-shave Oil
I’m not a big fan of pre-shave oils, but some have found that applying some on the neck helps reduce irritation. Wet your face, apply the oil, and then apply your shaving cream.
4. Use Cold Water to Shave
Consider, after a normal prep, using cold water to shave with. Some shavers have reported a significant reduction in irritation with cold water shaving. Here is the Art of Manliness guide to cold water shaving.
5. Use a “Gentle” Razor With a High-Performance Blade
First, what do I mean by a “gentle” razor? In the world of DE shaving, some razors have a reputation for being “gentle” because they’re engineered to expose less of the blade edge when shaving. While you won’t get as close of a shave with a gentle DE razor, it’s definitely much more comfortable and causes less irritation. Some popular gentle razors include the Merkur Classic, Weishi, and many of the vintage Gillette safety razors. On adjustable DE razors you can adjust the razor for a gentler or more aggressive shave. Dial down for a milder shave on the neck, then dial up for other parts of your face.
One of the things you can do to further reduce irritation when shaving on sensitive areas like the neck is to combine a gentle razor with a high performance razor blade like the blades from Feather. A gentle razor that doesn’t expose much blade to the skin, coupled with a high performance blade, provides a much more efficient cut, reducing the chance for irritation.
Adjusting a cartridge razor (like a Gillette Fusion) in this fashion is tougher as the variety of available blade sources is limited. If you’re using a cartridge razor, your best bet to reduce irritation is to go with a cartridge with fewer blades. However that is not “etched in stone,” so some experimentation may be necessary.
6. Flattening–Not Over-Stretching–The Skin
Let’s face it — the neck is not a flat area; it’s a terrain of curves and odd angles. Many shavers will tilt their head upwards to pull the skin of the neck taut. This may help, but it doesn’t really flatten the area. Instead, try leaning forward and tilting the head back SLIGHTLY. Shorter strokes on the razor may also help cover flatter areas more consistently.
7. Use No Pressure on the Razor
No pressure means NO PRESSURE!
8. Try Some “Advanced” Shaving Tricks on Small Areas
This is not for everyone, but if you have small areas of stubble or rough patches, you can try some techniques like “J-Hooking” or “Blade Buffing” to cover those areas without re-shaving–and possibly getting irritation–over a wider area. However, over-doing these advanced techniques can be a prescription for trouble if not done carefully and judiciously.
9. Thoroughly Clean the Neck After the Shave
A very thorough rinsing of the neck with warm water after the shave (before applying aftershave) will help remove any remaining lather residue, particularly important for those prone to ingrown hairs. I personally go one step further: after the warm water rinse, I soak a cotton pad in witch hazel and wipe down the area. You may be surprised what the pad picks up. Follow with a brief cool water rinse and aftershave product.
10. Settle for Less
Do you really need that “baby’s butt smooth” neck? Maybe it’s time to skip that third pass and go for looking “presentable.”
Be sure to listen to my podcast interview with Mark:
__________________
Mark Herro (AKA “Mantic59”) has been showing the world “what your father didn’t teach you about shaving” for the past six years with videos that have become the seminal “how to shave” tutorials. He also shares expertise about shaving and grooming at www.sharpologist.com
Submitted by: Paul Cunningham in Glen Rock, NJ
