Drawstrings are a common feature on a lot of athleisure wear. I’m talking about hoodies, sweatpants, and shorts.
But drawstrings have a tendency to come out of their “casing” — particularly after the garment they’re a part of gets laundered.
Reinserting the drawstring into the garment typically requires several minutes of painstakingly threading it back through the casing, pushing it along centimeter by centimeter, because the only thing of substance you can grab on to through the casing’s cloth is the drawstring’s short plastic or metal tip.
One method that is supposed to make this process easier involves attaching a large safety pin to the end of the drawstring so that you have more to grab on to while you thread it back through the casing. I’ve tried this method, but only found it a slight improvement from the safety pin-less method. The process still took several minutes.
But then I discovered a drawstring rethreading method that gets the job done in under 60 seconds. It’s been a gamechanger.
And all you need is a straw and a stapler.
How to Restring a Drawstring With a Straw and a Stapler
1. Gather Supplies: Loose Drawstring, Straw, Stapler
Always a good idea to keep some straws on hand, especially if you’re a dad or cool uncle. Little kids are always asking for a straw when you give them a drink.
2. Thread Drawstring Through Straw
3. Staple Straw and Drawstring
This ensures the drawstring doesn’t slip out of your straw while you’re threading. It doesn’t damage the string.
4. Thread Straw Through Casing and Out the Other End
The straw makes it much easier to thread the string through the casing because it’s easier to feel it through the casing’s fabric. Also, the straw won’t snag on material as you’re threading. It took me about 30 seconds to rethread this drawstring with a straw compared to the several minutes it takes with other methods.
After you’ve pulled the straw out the other end, remove the staple and remove the straw. Bam! You’ve got a rethreaded drawstring.
Submitted by: Ian in Hong Kong, China
