How to Make a Wooden Periscope

While much of the world is in quarantine of some form, and often sequestered with children who are itching for something to do, we thought it would be fun to offer a weekly craft/project idea you can work on together to help while away the time. If you make the craft, we’d love to see it; share on social media with the hashtag #aomkidcraft.

When I think of periscopes, the first thing that comes to mind is a submarine, cruising through dark waters, scanning the horizon for enemy ships. But as it turns out, periscopes have a much more varied history than I imagined. They’re used in tanks and armored vehicles, and were employed by soldiers in WWI both to see out of their trenches in general, and as rifle scopes that enabled them to target the enemy while remaining under cover.

Periscopes are simple devices that rely on either mirrors or prisms. Periscopes that use mirrors reflect light between two 45-degree mirrors while prism periscopes use the principles of refraction to bring an image to the viewerâ€™s eye.

You can make a mirror periscope out of a material like cardboard, but the wooden variety is sturdier and feels and looks cooler. It’s a pretty easy weekend project for a kid to complete (with some help from Dad, of course), and all you need is some plywood, a couple mirrors, and a handful of other items, like glue and tape. Many wooden periscope instructions call for a specific size mirror, but in my experience, itâ€™s not easy to find specific mirror sizes, and not all hardware stores will cut them to size for you. With that in mind, this tutorial is going to help you make a periscope that will fit whatever small, rectangular mirror you can get your hands on. Though, Iâ€™d recommend getting something thatâ€™s at least 2 x 2 inches and not bigger than 5 x 5 inches. Likewise, Iâ€™m using 3/4-inch plywood, but you can use 1/2-inch or something thicker if itâ€™s all you have on hand.

Finally, while the list of materials I include here is very barebones, it can get the job done. But if you have things like a table saw, miter saw, and a pneumatic nail gun that shoots finish nails, the process is much easier.

How to Make a Mirror Periscope

Materials and Tools

2 small mirrors
Plywood (a 4-by-4 foot sheet is plenty)
Wood glue
Hot glue gun (and/or clear packing tape or double-sided tape)
Saw (ideally a table saw and miter saw, but a circular saw or even hand saw can work)
Measuring tape
Pencil
Speed square

Step 1: Measure Mirror; Cut Plywood

Measuring and cutting the plywood.

Measure the width of your mirror (the short way, if using a rectangle) and mark it on the plywood.

Measuring the plywood with the help of pencil and scale.

Cut a piece of plywood thatâ€™s as wide as your mirror and 16 inches long.

Cutting plywood with machine.

Repeat to create two strips of plywood and set them aside.

Step 2: Mark 45-Degree Angle

Marking angles on plywood.

Use your speed square to mark a perfect 45-degree angle on another piece of plywood and draw a line.

Step 3: Mark Out the Mirror

Marking the mirror with pencil placed on plywood.

Mark drawn on plywood.

Place the long side of your mirror (any side if your mirror is square) along the 45-degree line. Make sure one corner of the mirror is flush to the edge of the plywood. Mark the spot where the other side of the mirror ends.

Step 4: Do Some Further Marking

Measurements done on plywood with the help of protractor.

Measurements done on plywood.

Use your speed square to draw a new 90-degree line from the base of the plywood up to the mark, indicating the length of your mirror.

Step 5: Cut Out Triangle

Cutting plywood in triangular shape.

Cut out the triangle youâ€™ve just drawn and use it as a template to create three more.

Stack of triangular shaped plywood.

You should end up with four triangles whose long side is the same length as the longest side of your mirror.

Step 6: Attach Mirrors

Glue being attached to plywood.

Use a hot glue gun, clear tape, super glue, or double-sided tape to attach your mirrors to your wedge-shaped pieces.

Mirror being attached to plywood.

Two mirror attached plywood placed on another plywood.

Note: Iâ€™m using a hot glue gun here, but cold temperatures made the bond weaker than I wanted, so I eventually added clear packing tape to help strengthen the connection, which youâ€™ll see in later images.

Step 7: Glue Mirrors to Plywood Strips

Mirror being attached to Mirror-plywood.

Mirror-plywood being attached to another plywood.

Two mirror attached plywood placed.

Glue your mirror wedges to the ends of your 16-inch-long plywood strips. Wood glue is your best bet here. Wait for the glue to set up, or use finish nails to hold it in place immediately.

Step 8: Measure the Sides

Measuring plywood with scale.

Prepare to cut the strips that will make up the sides of your periscope. Start by measuring the width of your existing plywood/mirror combo piece once the glue has set.

Step 9: Measure the Length

Side of plywood is being measured.

To measure the length, place your two mirrored strips together so that the top of one strip is against the top of the other stripâ€™s mirror as shown above. Measure the total length of the pieces together.