To become a defter tennis player you have to practice tennis. To become a better chef, you have to practice cooking. To become a more masterful piano player, you have to practice piano.
And to become an all-around stronger man, you have to practice strength.
You might not have thought of strength as something to be practiced, but you ought to. According to Pavel Tsatsouline, former Soviet Special Forces instructor and the father of the kettlebell in the West, “Strength is a skill.†And like any skill, it’s one you’ve got to consistently work at.
One of the ways to build the skill of strength is by what Pavel calls “greasing the groove.†What exactly greasing the groove means, and how you can use this exercise method to build strength is what we’ll explain today.
Practice, Skill, and the Muscle-Neuron Connection
When you lift a heavy weight (be it yourself or a barbell), your muscles contract. That contraction begins when your nervous system sends a signal to your muscle fibers. When a movement is performed over and over again, and the muscle fibers repeatedly receive an identical signal, a more efficient neuromuscular motor pattern develops.
The process by which neurons become more efficient is called myelination. Through regular practice of a movement, a fatty white substance forms a sheath around the axons of nerve cells that allows the nerve impulse to move more quickly.
The faster your nerve cells can fire, the faster your muscles can contract, the more ingrained a motor pattern gets in your neurobiology, and the easier and more natural a movement becomes. You don’t have to think about walking because you’ve been practicing it daily for years and years. It you started playing the piano at age 30, at first it would feel very awkward, but would become more and more instinctive with years of practice.
Efficient neuromuscular motor patterns not only make movements easier to perform, but also lend the movement more potential force. The faster the muscles contract when a signal hits them, the greater the number of muscle fibers that actually contract. Combine faster muscle contraction with more fibers contracting and you’re able to exert more force. Thus, neuromuscular efficiency makes you stronger. Yay science!
Thus, one way to get stronger is by practicing the skill of strength, and you do that by greasing the groove.
How to Practice the Skill of Strength: Greasing the Groove
There are two primary ways to get strong. With the first, you lift progressively heavier weights, which causes micro trauma (tiny tears) in the muscle fiber itself. The muscle fibers recover and then adapt to the load, so that they rebuild stronger than before.
The other way to get stronger is by regularly doing strength exercises with lighter reps and weight, but doing them more often than you would a heavy workout. This teaches your muscles to fire more efficiently, or in other words, “greases the groove.â€
“Greasing the groove†(GtG) is a phrase Pavel coined to describe what you’re doing when you consistently practice a specific strength skill. The more you practice, the more of a pathway forms between your muscles and your nervous system. Or in other words, the more you practice, the more you “grease the neurological groove.†By regularly doing strength movements, we help the myelination process along, and increase the efficiency of the neuromuscular connections involved in those exercises. The more efficiently you can perform an exercise, the more reps you can do, and the more reps you can do, the stronger you become.
By regularly doing proper pull-ups, for example, you’re “greasing†the neurological groove that allows you to fire the muscles that are involved with performing pull-ups efficiently and effectively. Continually greasing the groove will make doing perfect pushups feel more and more natural and easier, allowing you to gradually do more reps and building your strength in that exercise.
If you want to implement the GtG tool into your strength-building arsenal, here are the basics:
Pick an exercise in which you want to become stronger. Bodyweight exercises like pull-ups, push-ups, and dips are best for greasing the groove as they’re easier to do on a regular basis than, say, barbell exercises.
When I was in law school, I would grease the groove with push-ups. Currently, I GtG with pull-ups and kettlebell swings. Jimmy Sonni, managing editor at Huffington Post and author of a great biography on Cato, keeps a kettlebell by his desk for GtG-ing. Do his co-workers think he’s a weirdo? At first they did, but now they don’t give it a second thought.
Perform the exercise several times a day at low reps. When you grease the groove, you are NOT exercising to failure. That will only lead to overtraining and would get in the way of your main strength training program and overall progression. In fact, you don’t even want your GtG session to induce fatigue.
Rather, with greasing the groove, the goal is to do lots of reps a day, spread throughout the day. If you’re using a kettlebell, you want to keep the weight relatively low. You want to practice the skill of strength, but not become fatigued by it. You shouldn’t even break a sweat. Some folks recommend doing 40% to 50% of your max weight/reps, while others say 50% to 80%. My recommendation is to start conservatively, and gradually add volume and intensity throughout the weeks and months as your groove gets ever greasier.
There’s no fixed recommendation for how many sets of an exercise you should do a day. Instead, Pavel recommends “training as often as possible while being as fresh as possible.†That sweet spot is going to differ from man to man.
Here’s an example of how a greasing the groove routine could work. Let’s say right now you can do 10 pull-ups. To get going with GtG, you’ll start off doing 40% of that, or 4 reps. You might decide to do 5 sets a day or 20 pull-ups altogether. In a couple weeks add another rep to your sets. A few weeks later, add another. Now you’re up to 30 pull-ups a day. You’ll know if you’re adding too much too fast if you feel fatigued at the end of your set and/or the end of the day. Because you kept far from failure when you performed the exercise and you had more than adequate rest time between bouts to recover, you shouldn’t feel tired or over-trained. Instead, you should feel stronger.
Decide how to implement your GtG sets. How you decide to break up your reps throughout the day is all a matter of preference. The goal is to make greasing the groove so easy to do that it just becomes part of your daily routine.
You could have something structured like an every-hour-on-the-hour routine in which you perform your reps at the top of every hour.
Or, if you use the pomodoro technique in which you work intensely for 45 minutes and then take a break for 15, you could do your exercises at the beginning of your break. I did this during law school. When I was down in the library studying, I’d work for 45 minutes and then crank out 5-10 push-ups during my 15-minute break.
If you prefer something a little less structured, just set some conditional rules that will determine when you grease the groove. One could be: “Before I sit down in my office chair, I must perform five pushups.†If you get up multiple times during a shift you’ll easily crank out 50-60 push-ups a day.
You could also put a pull-up bar or kettlebell somewhere in an area of your office/house that you frequently walk by. Your rule could be: “When I walk under the pull-up bar, I must perform two pull-ups.†Or: “When I walk by the kettlebell, I must perform 10 swings.†Pavel’s 60-year-old father-in-law had a similar system in place. Whenever he went down into the basement, he had to perform 5 chin-ups. He averaged anywhere from 25 to 100 reps a day, depending on how often he went down to the basement. When he tested himself a few weeks later, he was able to perform 20 consecutive reps, something he hadn’t even been able to do as a young Marine.
With the more unstructured greasing the groove routine, the reps you perform each day will vary. Sometimes it will be a lot, sometimes it won’t. That’s completely fine, as long as you’re not doing so many they you get fatigued. Remember, the goal isn’t to go to failure. It’s to practice the skill of strength so that our neurons learn to fire our muscles more efficiently and effectively.
Blast the groove. On the last rep of your greasing the groove sets, Pavel recommends that you “blast the groove†by performing the negative part of the movement (e.g., lowering yourself down on a pull-up) nice and slow. This creates an intense contraction and stimulates “synaptic potentiation.†I talked to my strength coach and buddy Matt Reynolds about this and he recommended limiting how often you blast the groove; the negative, or eccentric, part of a movement creates the most muscle damage and inflammation. This could get in the way of your recovery for your regular training. So just blast the groove on the days you’re not doing other dedicated workouts, or after the primary workouts themselves.
Focus on perfection. Greasing the groove is how we practice the skill of strength, and as we know, practice doesn’t make perfect — perfect practice does. You want to “program†the movement into your neuromuscular system as perfectly as possible, so perform the reps of whatever exercise you’re performing perfectly. If it’s the pull-up, then do a strict, controlled pull-up. If it’s a kettlebell swing, do a perfect, crisp swing. This is yet another reason you don’t go to failure or even let yourself get overly fatigued when you’re greasing the groove — if you did, your form would suffer.
The Advantages and Drawback of Greasing the Groove
There are some nice advantages to the greasing the groove method of building strength. You can easily fit it into spare moments, it keeps you active during the day, you can do it at the office because you won’t get sweaty, it doesn’t require a gym membership or special equipment, and it doesn’t leave you really tired. For that last reason, it can be a great routine for LEOs and other first responders as they need to always be ready to hit the ground running and can less afford to go into their shift totally smoked from a heavy lifting session.
GtG has a downside too though. It will typically only help you improve in the exercise that you’re greasing the groove on. There’s little to no carry over in benefits to other exercises. So if you grease the groove with pull-ups, you’ll notice an improvement on the number of overall pull-ups you can do, but you won’t see much of an improvement in other exercises. Matt said you could see a bit of carry over from improving your pull-ups on lifts like barbell rows or inverted rows, but not much. To get stronger on your main lifts like deadlift or bench press, you need to regularly add weight to your deadlift and bench.
So instead of thinking of greasing the groove as a program in and of itself, think of it as a supplement to your overall strength training program. It’s helped me tremendously in improving the number of pull-ups I can do so that when I do them in my dedicated training sessions I can actually hit my programmed reps. So if there’s an exercise like pull-ups or dips where the number you can do is abysmally low, consider greasing the groove to get it up.
Just like grilling a steak or speaking a foreign language, strength is a skill, so practice it!
Submitted by: Andrew Freebrey in Newport, Isle of Wight, England
