{"id":51263,"date":"2015-10-15T15:48:20","date_gmt":"2015-10-15T20:48:20","guid":{"rendered":"http:\/\/www.artofmanliness.com\/?p=51263"},"modified":"2026-01-08T14:06:26","modified_gmt":"2026-01-08T20:06:26","slug":"how-a-cars-engine-works","status":"publish","type":"post","link":"https:\/\/beta.artofmanliness.com\/skills\/cars\/how-a-cars-engine-works\/","title":{"rendered":"Gearhead 101: Understanding How Your Car’s Engine Works"},"content":{"rendered":"

\"How<\/a><\/p>\n

I\u2019ve never been a car guy. I just didn\u2019t have any interest in tooling around under the hood to figure out how my car works. Except for replacing my air filters<\/a> or changing the oil<\/a> every now and then, if I ever had a problem with my car, I\u2019d just take it into the mechanic and when he came out to explain what was wrong, I nodded politely and pretended like I knew what he was talking about.<\/p>\n

But lately I\u2019ve had the itch to actually learn the basics of how cars work. I don\u2019t plan on becoming a full on grease monkey, but I want to have a basic understanding of how everything in my car actually makes it go. At a minimum, this knowledge will allow me to have a clue about what the mechanic is talking about the next time I take my car in. Plus it seems to me that a man ought to be able to grasp the fundamentals of the technology he uses every day. When it comes to this website, I know about how coding and SEO works; it\u2019s time for me to examine the more concrete things in my world, like what\u2019s under the hood of my car.<\/p>\n

I figure there are other grown men out there who are like me — men who aren\u2019t car guys but are a little curious about how their vehicles work. So I plan on sharing what I\u2019m learning in my own study and tinkering in an occasional series we\u2019ll call Gearhead 101. The goal is to explain the very basics of how various parts in a car work and provide resources on where you can learn more on your own.<\/p>\n

So without further ado, we\u2019ll begin our first class of Gearhead 101 by explaining the ins and outs of the heart of a car: the internal combustion engine.<\/p>\n

The Internal Combustion Engine<\/h3>\n

An internal combustion engine is called an \u201cinternal combustion engine\u201d because fuel and air combust inside<\/em> the engine to create the energy to move the pistons, which in turn move the car (we\u2019ll show you how that happens in detail below).<\/p>\n

Contrast that to an external combustion engine, where fuel is burned outside<\/em> the engine and the energy created from that burning is what powers it. Steam engines are the best example of this. Coal is burned outside of the engine, which heats water to produce steam, which then powers the engine.<\/p>\n

Most folks think that in the world of mechanized movement, steam-powered external combustion engines came before the internal combustion variety. The reality is that the internal combustion engine came first. (Yes, the ancient Greeks messed around with steam-powered engines, but nothing practical came from their experiments.)<\/p>\n

In the 16th<\/sup> century, inventors created a form of internal combustion engine using gunpowder as the fuel to power the movement of the pistons. Actually, it wasn\u2019t the gunpowder that moved them. The way this early internal combustion engine worked was you\u2019d stuff a piston all the way to the top of a cylinder and then ignite gunpowder beneath the piston. A vacuum would form after the explosion and suck the piston down the cylinder. Because this engine relied on the changes in air pressure to move the piston, they called it the atmospheric engine. It wasn\u2019t very efficient. By the 17th<\/sup> century, steam engines were showing a lot of promise, so the internal combustion engine was abandoned.<\/p>\n

It wouldn\u2019t be until 1860 that a reliable, working internal combustion engine would be invented. A Belgian fellow by the name of Jean Joseph Etienne Lenoir patented an engine that injected natural gas into a cylinder, which was subsequently ignited by a permanent flame near the cylinder. It worked similarly to the gunpowder atmospheric engine, but not too efficiently.<\/p>\n

Building on that work, in 1864 two German engineers named Nicolaus August Otto and Eugen Langen founded a company that made engines similar to Lenoir\u2019s model. Otto gave up managing the company and started working on an engine design that he had been toying with since 1861. His design led to what we now know as the four-stroke engine, and the basic design is still used in cars today.<\/p>\n

The Anatomy of a Car Engine<\/h3>\n
\"Engine<\/a>

A V-6 Engine<\/p><\/div>\n

I\u2019ll show you how the four-stroke engine works here in a bit, but before I do, I thought it would be helpful to go through the various parts of an engine so you\u2019ll have an idea of what\u2019s doing what in the four-stroke process. There is terminology throughout these explanations that relies on other terms in the list, so don\u2019t worry if you get confused at first. Read through the whole thing to get an overall grasp, and then read it again so you have a basic understanding of each piece as it\u2019s being talked about.<\/p>\n

Engine Block (Cylinder Block)<\/strong><\/p>\n

The engine block is the foundation of an engine. Most engine blocks are cast from an aluminum alloy, but iron is still used by some manufacturers. The engine block is also referred to as the cylinder block because of the big hole or tubes called cylinders that are cast into the integrated structure. The cylinder is where the engine\u2019s pistons slide up and down. The more cylinders an engine has the more powerful it is. In addition to the cylinders, other ducts and passageways are built into the block that allow for oil and coolant to flow to different parts of the engine.<\/p>\n

\n

Why is an engine called a \u201cV6\u201d or \u201cV8\u201d?
\n<\/strong><\/p>\n

Great question! It has to do with the shape and number of cylinders an engine has. In four-cylinder engines, the cylinders are typically mounted in a straight line above the crankshaft. This engine layout is called an inline engine<\/em>.<\/p>\n

Another four-cylinder layout is called the \u201cflat four.\u201d Here the cylinders are laid horizontally in two banks, with the crankshaft going down the middle.<\/p>\n

When an engine has more than four cylinders, they are divided into two cylinder banks — three cylinders (or more) per side. The division of cylinders into two banks makes the engine look like a \u201cV.\u201d A V-shaped engine with six cylinders = V6 engine. A V-shaped engine with eight cylinders = V8 — four in each cylinder bank.<\/p><\/blockquote>\n

Combustion Chamber<\/strong><\/p>\n

The combustion chamber in an engine is where the magic happens. It\u2019s where fuel, air, pressure, and electricity come together to create the small explosion that moves the car\u2019s pistons up and down, thus creating the power to move the vehicle. The combustion chamber is made up of the cylinder, piston, and cylinder head. The cylinder acts as the wall of the combustion chamber, the top of the piston acts as the floor of the combustion chamber, and the cylinder head serves as the ceiling of the combustion chamber.<\/p>\n

Cylinder Head<\/strong><\/p>\n

The cylinder head is a piece of metal that sits over the engine\u2019s cylinders. There are small, rounded indentations cast into the cylinder head in order to create room at the top of the chamber for combustion. A head gasket seals the joint between the cylinder head and cylinder block. Intake and outtake valves, spark plugs, and fuel injectors (these parts are explained later) are also mounted to the cylinder head.<\/p>\n

Piston<\/strong><\/p>\n

Pistons move up and down the cylinder. They look like upside down soup cans. When fuel ignites in the combustion chamber, the force pushes the piston downward, which in turn moves the crankshaft (see below). The piston attaches to the crankshaft via a connecting rod, aka the con rod. It connects to the connecting rod via a piston pin, and the connecting rod connects to the crankshaft via a connecting rod bearing.<\/p>\n

On the top of the piston, you\u2019ll find three or four grooves cast into the metal. Inside the grooves piston rings<\/em> are put in. The piston rings are the part that actually touch the walls of the cylinder. They are made from iron and come in two varieties: compression rings and oil rings. The compression rings are the top rings and they press outward on the walls of the cylinder to provide a strong seal for the combustion chamber. The oil ring is the bottom ring on a piston and it prevents oil from the crankcase from seeping into the combustion chamber. It also wipes excess oil down the cylinder walls and back into the crankcase.<\/p>\n

Crankshaft<\/strong><\/p>\n

The crankshaft is what converts the up and down motion of the pistons into a rotational motion that allows the car to move. The crankshaft typically fits lengthwise in the engine block near the bottom. It extends from one end of the engine block to the other. At the front of the end of the engine, the crankshaft connects to rubber belts which connect to the camshaft and delivers power to other parts of the car; at the back end of the engine, the camshaft connects to the drive train, which transfers power to the wheels. At each end of the crankshaft, you\u2019ll find oil seals, or \u201cO-rings,\u201d which prevent oil from leaking out of the engine.<\/p>\n

The crankshaft resides in what\u2019s called the crankcase on an engine. The crankcase is located beneath the cylinder block. The crankcase protects the crankshaft and connecting rods from outside objects. The area at the bottom of a crankcase is called the oil pan and that\u2019s where your engine\u2019s oil is stored. Inside the oil pan, you\u2019ll find an oil pump that pumps oil through a filter, and then that oil is squirted on to the crankshaft, connecting rod bearings, and cylinder walls to provide lubrication to the movement of the piston stroke. The oil eventually drips back down into the oil pan, only to begin the process again<\/p>\n

Along the crankshaft you\u2019ll find balancing lobes that act as counterweights to balance the crankshaft and prevent engine damage from the wobbling that occurs when the crankshaft spins.<\/p>\n

Also along the crankshaft you\u2019ll find the main bearings. The main bearings provide a smooth surface between the crankshaft and engine block for the crankshaft to spin.<\/p>\n

Camshaft<\/strong><\/p>\n

The camshaft is the brain of the engine. It works in conjunction with the crankshaft via a timing belt to make sure intake and outtake valves open and close at just the right time for optimal engine performance. The camshaft uses egg-shaped lobes that extend across it to control the timing of the opening and closing of the valves.<\/p>\n

Most camshafts extend through the top part of the engine block, directly above the crankshaft. On inline engines, a single camshaft controls both the intake and outtake valves. On V-shaped engines, two separate camshafts are used. One controls the valves on one side of the V and the other controls the valves on the opposite side. Some V-shaped engines (like the one in our illustration) will even have two camshafts per cylinder bank. One camshaft controls one side of valves, and the other camshaft controls the other side.<\/p>\n

Timing System<\/strong><\/p>\n

As mentioned above, the camshaft and crankshaft coordinate their movement via a timing belt or chain. The timing chain holds the crankshaft and camshaft in the same relative position to each other at all times during the engine\u2019s operation. If the camshaft and crankshaft become out of sync for whatever reason (the timing chain skips a gear cog, for example), the engine won\u2019t work.<\/p>\n

Valvetrain<\/strong><\/p>\n

The valvetrain is the mechanical system that\u2019s mounted to the cylinder head that controls the operation of the valves. The valve train consists of valves, rocker arms, pushrods, and lifters.<\/p>\n

Valves<\/strong><\/p>\n

There are two types of valves: intake valves and outtake valves. Intake valves bring a mixture of air and fuel into the combustion chamber to create the combustion to power the engine. Outtake valves let the exhaust that\u2019s created after the combustion out of the combustion chamber.<\/p>\n

Cars typically have one intake valve and one outtake valve per cylinder. Most high-performing cars (Jaguars, Maseratis, etc.) have four valves per cylinder (two intake, two outtake). While not considered a \u201chigh performance\u201d brand, Honda also uses four valves per cylinder on their vehicles. There are even engines with three valves per cylinder \u2014 two inlet valves, one outtake valve. Multi-valve systems allow the car to \u201cbreathe\u201d better, which in turn improves engine performance.<\/p>\n

Rocker Arms <\/strong><\/p>\n

Rocker arms are little levers that touch the lobes, or cams, on the camshaft. When a lobe lifts one end of the rocker, the other end of the rocker presses down on the valve stem, opening the valve to let air in to the combustion chamber or letting exhaust out. It works sort of like a see-saw.<\/p>\n

Pushrods\/Lifters<\/strong><\/p>\n

Sometimes camshaft lobes touch the rocker arm directly (as you see with overhead camshaft engines), thus opening and closing the valve. On overhead valve engines, the camshaft lobes don\u2019t come into direct contact with the rocker arms, so pushrods or lifters are used.<\/p>\n

Fuel Injectors<\/strong><\/p>\n

In order to create the combustion needed to move the pistons, we need fuel in the cylinders. Before the 1980s, cars used carburetors to supply fuel to the combustion chamber. Today, all cars use one of three fuel injection systems: direct fuel injection, ported fuel injection, or throttle body fuel injection.<\/p>\n

With direct fuel injection, each cylinder gets its own injector, which sprays fuel directly into the combustion chamber at just the right time to combust.<\/p>\n

With ported fuel injection, instead of spraying the fuel directly into the cylinder, it sprays into the intake manifold just outside the valve. When the valve opens, air and fuel enter the combustion chamber.<\/p>\n

Throttle body fuel injection systems sort of work how carburetors did, but without the carburetor. Instead of each cylinder getting its own fuel injector, there\u2019s only one fuel injector that goes to a throttle body. The fuel mixes with air in the throttle body and then is dispersed to the cylinders via the intake valves.<\/p>\n

Sparkplug<\/strong><\/p>\n

Above each cylinder is a sparkplug. When it sparks, it ignites the compressed fuel and air, causing the mini-explosion that pushes the piston down.<\/p>\n

The Four-Stroke Cycle \"Four<\/a><\/strong><\/h3>\n

So now that we know all the basic parts of the engine, let\u2019s take a look at the movement that actually makes our car move: the four-stroke cycle.<\/p>\n

The above illustration shows the four-stroke cycle in a single cylinder. This is going on in the other cylinders as well. Repeat this cycle a thousand times in a minute, and you get a car that moves.<\/p>\n

Well, there you go. The basics of how a car engine works. Go take a look under your car\u2019s hood today and see if you can point out the parts that we discussed. If you\u2019d like some more info on how a car works, check out the book How Cars Work<\/a>. <\/em>It has helped me out a lot in my research. The author does a great job breaking things down into language that even the total beginner can understand.<\/p>\n","protected":false},"excerpt":{"rendered":"

I\u2019ve never been a car guy. I just didn\u2019t have any interest in tooling around under the hood to figure out how my car works. Except for replacing my air filters or changing the oil every now and then, if I ever had a problem with my car, I\u2019d just take it into the mechanic […]<\/p>\n","protected":false},"author":3,"featured_media":100515,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[42382,6,42259],"tags":[42238],"yst_prominent_words":[],"class_list":["post-51263","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-cars","category-featured","category-skills","tag-cars"],"featured_image_urls":{"aom":"https:\/\/content.artofmanliness.com\/uploads\/2015\/10\/engine-372x230.png","reactor-320":"https:\/\/content.artofmanliness.com\/uploads\/2015\/10\/engine-320x214.png"},"_links":{"self":[{"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/posts\/51263","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/comments?post=51263"}],"version-history":[{"count":16,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/posts\/51263\/revisions"}],"predecessor-version":[{"id":51265,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/posts\/51263\/revisions\/51265"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/media\/100515"}],"wp:attachment":[{"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/media?parent=51263"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/categories?post=51263"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/tags?post=51263"},{"taxonomy":"yst_prominent_words","embeddable":true,"href":"https:\/\/beta.artofmanliness.com\/app-json\/wp\/v2\/yst_prominent_words?post=51263"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}